ColorSpan Legacy System Control - User Guide

1-28 Adding and Configuring Ports
To Set Timeouts
(NetWare port only)
Timeout refers to the number of seconds the server waits for
more data to be sent before it cancels the print job. If you have a
slow network, set a longer timeout to avoid having jobs canceled
before they reach the print server.
To set a port timeout, follow these steps:
1. In the Configure Port dialog box, click Timeout…
The following dialog box appears:
2. Set the desired timeout value.
You can use values from 2 seconds to 10 minutes.
3. Click OK to save any changes.
Fig. 1-13. Timeout dialog box