ColorSpan Legacy System Control - User Guide

1-26 Adding and Configuring Ports
Port Routing Notes
◆
If you will be installing only one printer, all of the ports must
be routed to it.
◆
If you will be installing more than one printer, the ports may
be split between the printers, or they may all be routed to
one printer.
◆
If you are removing a printer, any ports formerly routed to
the printer must be rerouted to a remaining printer.
◆
If you are removing an external disk, any ports formerly
routed to the drive may be rerouted to another RIP Saver
queue. Alternatively, you may choose to not route a port to a
RIP Saver queue.
◆
Routing changes made while a file is entering a port are not
effective until the next job is sent.