ColorSpan Legacy System Control - User Guide

1-12 Naming the Server
Naming the Server
This option enables you to specify a name for the ColorSpan
print server. The Server Name appears:
◆
Preceding each AppleTalk port in the Macintosh Chooser.
Changes take effect only when the port is idle, so to avoid
confusion over different server names appearing in the
Chooser, change the name only when all AppleTalk ports are
idle.
◆
As the print queue name in the Microsoft Windows Network
when you configure WinLink ports.
To name the print server:
1. Select Server Name... from the System menu.
The following dialog box appears:
2. Type in the name for the server.
The server name cannot end with a space.
3. Click OK.
It takes about one minute for a new AppleTalk port name to
appear in the Chooser.
A new WinLink port name will appear on the Windows Net-
work after you restart the server.
Fig. 1-3. Naming the print server