ColorSpan Legacy System Control - User Guide

1-10 Restarting and Shutting Down
Restarting and
Shutting Down
System Control must be shut down in an orderly manner before
the ColorSpan print server main Power switch is turned off.
Always use the Shutdown command before you turn power off.
If you plan to restart immediately, avoid power shutdown and
use the Restart command instead.
— EXTREMELY IMPORTANT —
Caution Turning off power to restart System Control can
cause loss of data or corrupt the system. Instead,
use the Restart command to stop the print server
and immediately restart it.
To Restart the Server
You can use the Restart selection in the System menu when you
want to stop the system and immediately restart it.
When you restart, any jobs that are currently spooling, process-
ing or printing are deleted.
To restart the server:
1. Select Restart from the System menu.
The system will ask you to confirm that you want to restart.
2. Click OK to continue.
If there are any jobs currently spooling, processing, or print-
ing, a dialog box appears to inform you of this, since they
will be lost during the restart. You can choose Do Not
Restart at this time.
3. Click Restart to continue.
The system restarts.