ColorSpan Legacy System Control - User Guide

B-10 Unix and VAX Based Computers
ln /etc/init.d/lp /etc/rc0.d/K251p
ln /etc/init.d/lp /etc/rc2.d/K851p
ln /etc/init.d/lp /etc/rc2.d/S851p
c. Edit the /etc/ttys and /etc/rc files.
If the server is the first printer added to the system,
ensure that the lines in /etc/rc (or
/etc/rc.local for some systems) to start the lpd
(line print daemon) are active (not commented out with
a #).
6. Ping the printer.
Make sure the printer and network are communicating, For
example:
ping CMPRO
[Return]
7. Shut down printing services.
It is recommended that you do this before defining your
printer using lpadmin. Your pathname may be different
than this example:
/usr/lib/lpshut
8. Inform the printing system that the print server uses LPD/
LPR printing protocol.
/usr/lib/system -t bsd CMPRO