ColorSpan Legacy System Control - User Guide

Unix and VAX Based Computers B-3
5. Edit the /etc/printcap file.
Open the /etc/printcap file and edit it to add an entry
for the server. The pathnames for your system may not
match those shown in the following examples:
more /etc/printcap
[Return] (view the printcap file)
vi /etc/printca
p [Return] (edit the printcap file)
6. Add an entry for the server in the
/etc/printcap file.
This example describes how to configure two input ports on the
server:
# LaserMaster server on Ethernet TCP/IP
DM1:\
:lp=:\
:rm=CMPRO:\
:rp=DisplayMaker:\
:sd=/usr/spool/DM1:\
:lf=/usr/spool/DM1/lp-log:\
:sh=:\
:sf=:\
:mx=0
CLC1:\
:lp=:\
:rm=CMPRO:\
:rp=CLC:\
:sd=/usr/spool/CLC1:\
:lf=/usr/spool/CLC1/lp-log:\
:sh=:\
:sf=:\
:mx=0