ColorSpan Legacy System Control - User Guide

Reinstalling the Server Software A-11
Reinstalling the Server
Software
This procedure shows you how to completely reinstall the server
software. Follow these instructions to:
◆
Replace a version prior to 4.0. Older versions of the server
software cannot be updated using the Update process
described earlier.
◆
Replace any version when a “clean install” is desired.
◆
Reinstall the server software after all other troubleshooting
measures have failed to resolve a problem.
Caution
The reinstallation process will reset the Port and
Printer configuration settings to their default values
and
delete
the Job Log files and any spooled or RIP
Saver files stored on the internal disk. Save to exter-
nal disk or diskette any of these files you wish to
keep.
To reinstall the software, you will need:
◆
ColorSpan Print Server Software Installation Diskette
◆
ColorSpan Print Server Software CD-ROM
◆
ColorMark Color Management System Software CD-ROM
This process takes up to one hour to complete, depending on
the size of the server’s internal fixed disk drive.
1. If the ColorSpan server is not running, power on the
server.
After the startup sequence, the System Control interface
appears on the screen.
2. Wait until all jobs are done spooling, RIPing, and printing.
3. Load the ColorSpan Print Server Software Installation Disk
into the diskette drive.
4. Load the ColorSpan Print Server CD-ROM into the server
CD-ROM drive.
5. Perform a Shutdown and power off the server.
6. If there are any external disk drives connected to the
server, turn of f their power switches.