ColorSpan Legacy System Control - User Guide
Diagnostics A-3
6. When you are finished running the Diagnostics, select Exit.
The Diagnostics program asks whether you want to save the
test results to diskette.
To save the results to diskette, insert a blank, standard DOS-
formatted (File Allocation Table format) diskette into the
server diskette drive and type Y. Reinsert the Diagnostics
disk after the file is written to the blank disk.
If you do not want to save the results, type N.
7. Remove the Diagnostics disk from the drive.
8. Turn off the print server’s power switch.
9. Restart the print server.