ColorSpan Legacy Print Server - Configuration Options Guide

6
details, but cannot be altered if the job has already been processed by the RIP. If the job has not yet
been processed (for example, while the job is in the Input Hold Queue or Input Attention Queue), those
options can be changed as well.
 Copies- controls the number of copies of the document to be printed.
 N-Up- specifies whether to N-Up the copies and what size gutter to print between copies. When N-
Up is enabled, multiple copies of the document are printed next to each other, across the width of
the media, rather than advancing media for each new copy.
 Step-and-Repeat- DisplayMaker Legacy Series XII and the Legacy Fabrijet only. When Step-and-
Repeat is enabled, the server will tile as many copies as will fit across the width of the media
currently loaded on the printer. The last image in a row will be clipped as necessary to fit the media
width. The process will repeat down the length of the page as specified.
○ Length- specifies how far down the page to repeat the tiled rows.
○ Gutter- specifies what size gutter to print between copies.
○ Offset- each successive row will be offset in the X axis (left-to-right) from the preceding row by
this percentage.
 Pages- for multipage jobs, specifies whether to print all pages or a series of consecutive pages
from the job. A single page can be specified by entering the same page for the “From:” and “To:”
fields.