HP P6000 Continuous Access Implementation Guide (T3680-96431, August 2012)

Table 8 Configuration form (continued)
(default = \Hosts\)Folder name:
Host name:
Operating system:
WWN:For each HBA port:
Virtual disk information
(default = \Virtual Disks\)Folder name:
Virtual disk name:
Disk group:
Size:
(Vraid0, Vraid1, Vraid5)Redundancy level:
(Mirrored write-back, unmirrored write-back)Write cache policy:
(On, off)Read cache policy:
(Read/write, read-only)Read/write permissions:
(default = 0)OS unit ID:
(None, Path A FO, Path A FO/FB, Path B FO, Path B FO/FB)Preferred controller
Host name:Presentation:
LUN:
DR group information
Array name:Source:
Virtual disk members:
Array name:Destination:
Virtual disk members:
Failsafe mode: (disabled, enabled)Parameters:
Write mode: (synchronous, enhanced asynchronous, or
basic asynchronous)
Destination mode: (none, read-only)
Upgrading controller software
The following documents provide detailed information on upgrading controller software. Make
sure you have these documents available before performing the upgrade.
Updating Product Software Guide for your array model and controller software version. You
can access this document from the Manuals page of the HP Business Support Center website:
http://www.hp.com/support/manuals.
In the Storage section, click Disk Storage Systems and then select your product from EVA Disk
Arrays.
HP P6000 Enterprise Virtual Array Compatibility Reference
Upgrading controller software 127