LUN (VLL) and Volume Shredder User Guide (T5214-96094, November 2011)

Volume Initialize Confirmation Dialog Box

Use the Volume Initialize confirmation dialog box to confirm the settings of the VLL volumes to be

initialized. The VLL volume-setting information table shows a list of VLL volumes to be initialized.

Figure 19 Volume Initialize Confirmation Dialog Box (for Confirming Volume Initialize Settings)

DescriptionItem

VDEV number for the VLL volume to be initialized.VDEV

• A VDEV number starting with E (for example, E1-1-(1))

indicates that the VDEV belongs to a parity group

consisting of one or more external LUs.

• A VDEV number starting with V (for example, V1-1-(1))

indicates that the VDEV belongs to a parity group

consisting of one or more XP Snapshot virtual volumes

(V-VOLs).

• A VDEV number starting with X (for example, X1-1-(1))

indicates that the VDEV belongs to a parity group

consisting of one or more XP Thin Provisioning virtual

volumes (V-VOLs).

Emulation type of the VLL volume to be initialized.Emulation

Capacity of the VLL volume to be initialized, either in

megabytes (MB) for open-systems volumes or in cylinders

(Cyl) for mainframe volumes.

Capacity

The LDKC number, the CU number, and the LDEV number

of the VLL volume to be initialized.

LDKC:CU:LDEV

Shows System Disk if the VLL volume is configured as a

system disk.

Option

Returns to the previous dialog box.Back

Volume Initialize Confirmation Dialog Box 51