LUN (VLL) and Volume Shredder User Guide (T5214-96094, November 2011)

DescriptionItem

The LDKC number, the CU number, and the LDEV number

of the VLL volume to be created.

LDKC:CU:LDEV

Shows System Disk if the VLL volume is configured as a

system disk.

Option

Returns to the previous dialog box.Back

Registers the Make Volume settings, and returns to the

Customized Volume window.

Cancels the Make Volume settings, and returns to the

Customized Volume window.

Cancel

Volume Initialize Dialog Box (1)

Use the Volume Initialize dialog box (1) to initialize VLL volumes other than OPEN-V.

Figure 17 Volume Initialize Dialog Box (1)

DescriptionItem

Number of the VDEV to be initialized. The VDEV number

indicates the parity group where the VDEV belongs. For

Parity Group

example, if the VDEV number is 1-1-(1), the VDEV belongs

to a parity group numbered 1-1.

• A VDEV number starting with E (for example, E1-1-(1))

indicates that the VDEV belongs to a parity group

consisting of one or more external LUs.

• A VDEV number starting with V (for example, V1-1-(1))

indicates that the VDEV belongs to a parity group

consisting of one or more XP Snapshot virtual volumes

(V-VOLs).

• A VDEV number starting with X (for example, X1-1-(1))

indicates that the VDEV belongs to a parity group

consisting of one or more XP Thin Provisioning virtual

volumes (V-VOLs).

Information about the VLL volumes to be initialized.Normal volume-setting information table

• No.: Setting number of the VLL volume to be initialized

in the table.

• Emulation: Emulation type of the VLL volume to be

initialized.

Volume Initialize Dialog Box (1) 47