LUN (VLL) and Volume Shredder User Guide (T5214-96094, November 2011)

DescriptionItem

(minimum - maximum) is shown under the Capacity field

(for example, 46 - 6720 MB, 50 - 7168 Cyl, or 315 -

8513 blocks).

When Capacity Unit is MB or Cyl, there might be a

difference of up to several hundred kilobytes between the

entered CV capacity and the resulting CV capacity.

Select to create a VLL volume using the remaining space

in the VDEV. This option is available only when the

Set remaining space as volume

emulation type is OPEN-V. This option is unavailable when

there are two or more free spaces in the VDEV.

Opens the selected settings in the LDEV information table

on the left.

Set

Deletes the settings from the VLL volume that is selected in

the LDEV information table.

Delete

Deletes all the settings in the LDEV information table.Clear

Opens the Make Volume dialog box (2). When no CV is

set, no volume will be made in the VDEV by the Make

Volume operation. In this case, the dialog box returns to

the Customized Volume window after a message appears.

Cancels the selected settings and returns to the Customized

Volume window.

Cancel

Make Volume Dialog Box (2)

Use the Make Volume dialog box (2) to assign an LDEV number and a CU number for the VLL

volumes to be created.

Figure 13 Make Volume Dialog Box (2)

DescriptionItem

Number of the VDEV to be initialized. The VDEV number

indicates the parity group where the VDEV belongs. For

Parity Group

40 Using the Virtual LVI/LUN and Volume Shredder GUI