LUN (VLL) and Volume Shredder User Guide (T5214-96094, November 2011)

Figure 10 Install CV Dialog Box (4)

DescriptionItem

Number of the VDEV to which the VLL volume belongs. The

VDEV number indicates the parity group where the VDEV

Parity Group

belongs. For example, if the VDEV number is 1-1-(1), the

VDEV belongs to a parity group numbered 1-1.

A VDEV number that starts with E (for example, E1-1-(1))

indicates that the VDEV belongs to a parity group that

consists of one or more external LUs.

System disk settings on the VLL volume.System Disk Setting table

• No.: Number of the VLL volume.

• LDKC:CU:LDEV: LDKC number, CU number, and LDEV

number for the VLL volume.

• Emulation: Emulation type of the VLL volume.

• Capacity: Capacity of the VLL volume displayed in the

unit selected from the Capacity Unit list in the Install CV

dialog box (1).

• Option: Shows System Disk if the VLL volume is

configured as a system disk.

If you select this check box and then click OK in the Install

CV confirmation dialog box, the Install CV dialog box (4)

Hide this dialog box

(If you select this option, this dialog box will not reappear

until you switch from the Customized Volume window to

another window.)

will not open until you close the Customized Volume

window.

Configures the selected VLL volume as a system disk.Set

36 Using the Virtual LVI/LUN and Volume Shredder GUI