HP XP24000/XP20000 Thin Provisioning Software User Guide (T5227-96015, November 2011)

Table 16 Error Code and Error Contents When Operating XP RAID Manager (continued)
SolutionError ContentsError Code (SSB2)Error Code (SSB1)
Reexecute the operation after
a brief interval.
The operation was rejected
because releasing pages in
0xaf250xb96b
the specified volume has not
been completed.
Makes sure that the volume is
a V-VOL.
Because the specified volume
was not a V-VOL, the
operation was rejected.
0xaf290xb96b
When increasing capacity,
specify that the capacity does
Because the specified
capacity exceeded the free
0xaf2a0xb96b
not exceed the free spacespace size immediately below
capacity displayed in thethe V-VOL, the operation was
rejected. V-VOL window. For details, see
the conditions for increasing
the V-VOL capacity in
“Increasing V-VOL Capacity”
(page 62).
Re-execute the operation after
a brief interval.
Because the specified volume
operation was not finished,
the operation was rejected.
0xaf2b0xb96b
Make sure the value of
remaining in the V-VOL
window is enough.
Because the shared memory
capacity is not enough to
increase the specified
0xaf2c0xb96b
capacity, the operation was
rejected.
When increasing capacity,
make sure that the ratio of free
Because the ratio of the free
space capacity of the pool to
0xaf2d0xb96b
space in the pool to free spacethe free space capacity of the
in the V-VOL is not below theV-VOL was less than the
V-VOL threshold. For details,V-VOL threshold, the
operation was rejected. see the conditions for
increasing the V-VOL capacity
in “Increasing V-VOL Capacity”
(page 62).
Wait until formatting of the
specified volume is finished, or
Because the specified V-VOL
was used by another
0xaf2e0xb96b
see “Using XP Thin Provisioningapplication or was being
with Other Products” (page 17)formatted, the operation was
rejected. and confirm whether the V-VOL
is used with the application
that the V-VOL capacity cannot
be increased.
Re-execute the operation after
the microcode is replaced.
Because the V-VOL capacity
was increased when the
0xaf2f0xb96b
microcode was replaced, the
operation was rejected.
Calling HP Technical Support
If you need to call HP technical support, make sure to provide as much information about the
problem as possible, including:
• The circumstances surrounding the error or failure
• The exact content of any error messages displayed on the host systems
• The exact content of any error messages displayed by Remote Web Console
80 Troubleshooting