HP XP24000/XP20000 Thin Provisioning Software User Guide (T5227-96015, November 2011)

Figure 15 XP Thin Provisioning Window (Pool View)
DescriptionItem
Use these options to filter the data to be displayed to view
either LDKC:CU information or Pool information.
LDKC:CU or Pool
Provides information about the selected V-VOL:
• LDKC:CU:LDEV: Logical DKC (LDKC) number, CU
number, and LDEV number. The icons can include the
following:
◦ indicates a normal LDEV.
◦ indicates a secured volume.
◦ indicates a remote command device.
◦ indicates a command device.
◦ indicates a secured command device.
A number followed by an X is an XP Thin
Provisioning V-VOL.
A number followed by a V is an XP Snapshot V-VOL.
V-VOL list
• Emulation: Emulation type. OPEN-V is the only
supported emulation type. CVS indicates a Virtual
LVI/LUN volume. For more information, see HP
XP24000/XP20000 Virtual LVI/LUN (VLL) and Volume
Shredder User Guide.
• Capacity: V-VOL capacity, in GB.
• Parity Group: Parity group number.
• Usage Rate: Pool usage level as a percentage of the
used capacity compared to the total capacity.
• Threshold: Potential demand capacity consumed
percentage at which a warning will be issued. Available
values are from 5% to 300%, in 5% increments.
• Paths: Number of LU paths to the volume, from 0 to
65,280.
• Operation: Whether or not you can perform an
operation on the V-VOL.
36 Using the XP Thin Provisioning GUI