HP XP24000/XP20000 Snapshot User Guide (T5213-96033, November 2011)

Table 34 Cause of Error and the Result of RAID Manager Command (SSB)
Cause of ErrorRAID Manager CommandSSB2SSB1
Because of the shortage of
the pair tables, XP Snapshot
pair cannot be created.
paircreate9685B901
B9A8
B9A9
Because of the shortage of
the differential tables, XP
paircreate9686
B9AD
B9AE
Snapshot pair cannot be
created.
Since the pool is not
available, XP Snapshot pair
cannot be created.
paircreate9700
When you create multiple XP
Snapshot pairs by specifying
paircreate9702
multiple S-VOLs for one
P-VOL, you specified the
pool ID that is different from
the pool ID used by the pairs
that are already created.
Therefore, an XP Snapshot
pair cannot be created.
Since the volume you
specified as the P-VOL is
paircreate9703
already used by another XP
Snapshot S-VOL, the pair
cannot be created.
Since the volume you
specified as the S-VOL is
paircreate9704
already used by another XP
Snapshot P-VOL, the pair
cannot be created.
Since the volume you
specified as the S-VOL is
paircreate9705
already used by another XP
Snapshot S-VOL, the pair
cannot be created.
Since the specified XP
Snapshot ID is already used
paircreate9706
by another XPp Snapshot
pair, the pair cannot be
created.
Since the capacity of the
pair exceeds the licensed
paircreate9707
capacity, the pair cannot be
created.
The command ended
abnormally because the
All commands9718
command other than the
paircreate command was
issued for the volume in the
pair other than the XP
Snapshot pair.
This error also may be
reported when the command
is executed by specifying an
unsupported parameter.
Troubleshooting When Using XP RAID Manager 99