HP XP24000/XP20000 Snapshot User Guide (T5213-96033, November 2011)

Table 34 Cause of Error and the Result of RAID Manager Command (SSB) (continued)
Cause of ErrorRAID Manager CommandSSB2SSB1
device setting, the pair
cannot be created.
Since you specified an
external volume as the XP
paircreate9742
Snapshot S-VOL, the pair
cannot be created.
Since you specified the
volume other than V-VOLs as
paircreate9745
the XP Snapshot S-VOL, the
pair cannot be created.
Since you specified a
pool-VOL as the XP Snapshot
paircreate9746
S-VOL, the pair cannot be
created.
Since you specified XP
Continuous Access P-VOL as
paircreate9747
the XP Snapshot S-VOL, the
pair cannot be created.
Since you specified XP
Continuous Access S-VOL as
paircreate9748
the XP Snapshot S-VOL, the
pair cannot be created.
Since you specified XP
Continuous Access Journal
paircreate9749
data volume or journal
volume in the intermediate
site of 3DC cascading
configuration as the XP
Snapshot S-VOL, the
Snapshot pair cannot be
created.
Since you specified XP
Continuous Access Journal
paircreate974a
P-VOL as the XP Snapshot
S-VOL, the pair cannot be
created.
Since you specified XP
Continuous Access Journal
paircreate974b
S-VOL as the XP Snapshot
S-VOL, the pair cannot be
created.
Since you specified XP
Continuous Access Journal
paircreate974c
journal volume as the XP
Snapshot S-VOL, the pair
cannot be created.
Since the volume you
specified as the S-VOL has
All commands974f
an S-VOL Disable attribute,
the command ends
abnormally.
Since you specified the
volume with the VMA setting
paircreate9750
as the XP Snapshot S-VOL,
the pair cannot be created.
Troubleshooting When Using XP RAID Manager 103