HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 26 Error Codes — Part Code 1005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
unlikely event that this error
occurs, contact HP technical
support.
6EThe configuration information
has been already changed.
LU path is set to a volume
which links as an expanded
LU.
10121005
Check the settings, and
request the setting of the
configuration information
again.
2EThe emulation type of a
volume that links as an
The emulation types of the
volumes combined into a
10131005
expanded LU is not the same.LUSE volume are not the
same. The error does not occur
normally because it is
guarded in the screen. In the
unlikely event that this error
occurs, contact HP technical
support.
6EThe configuration information
has been already changed.
LU path is set to the releasing
expanded LU. (You need to
10151005
Check the settings, and
request the setting of the
release the expanded LU and
path at the same time.)
configuration information
again.
2EThe specified port does not
exist. You have specified a
An error occurred. If this
problem persists, call HP
technical support.
10181005
wrong port number. Or the
specified port type
(exclusively for mainframe)
cannot be processed in this
agent. The error does not
occur normally because it is
guarded in the screen. In the
unlikely event that this error
occurs, contact HP technical
support.
2ELUN is invalid. (The specified
value is not in the
An error occurred. If this
problem persists, call HP
technical support.
10201005
specification.) The error does
not occur normally because
it is guarded in the screen. In
the unlikely event that this
error occurs, contact HP
technical support.
2EThe specified volume does not
exist. (You have specified
An error occurred. If this
problem persists, call HP
technical support.
10211005
wrong CU#:LDEV#.) Or the
LDEV (exclusively for
mainframe) cannot be
processed in this agent. The
error does not occur normally
because it is guarded in the
screen. In the unlikely event
that this error occurs, contact
HP technical support.
Remote Web Console Error Codes 99