HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)
Table 23 Error Codes — Part Code 0610 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iTo continue processing, click
[OK]. Otherwise, click
[Cancel].
Do you want to specify an
SSID without restrictions on
SLPRs?
590580610
0iCheck the setting range, and
enter a correct numerical
value.
The entered numerical value
is outside the setting range.
590600610
0iSpecify fewer alternate paths,
and then retry the operation.
Failed to have the number of
paths the same as the number
590610610
of the specified alternate
paths.
0iCheck the status of the
connected path, and then
retry the operation.
Failed to assign a normal
path.
590620610
0iDefine a path from a new
port to the external volume,
and then retry the operation.
The number of paths
registered in the port reached
the maximum.
590630610
0iCheck the details on the 610
xxxxx error, and then delete
A 610 xxxxx error exists in
Preview. Delete the row
590640610
the row containing the 610
xxxxx error.
containing the 610 xxxxx
error, and then select the
Apply button.
0iCheck the SSID.No SSID can be specified.590650610
0iTo continue processing, click
[OK]. To stop processing,
click [Cancel].
Do you want to specify a CU
without restrictions on SLPRs?
590660610
0WClick [OK].The volume has been
mapped as a mainframe
591070610
volume by the Add Volume
operation. The settings of the
volume made at the external
subsystem side are carried
over. Restore the volume
before using it.
0WTo continue the processing,
click [OK]. To stop the
processing, click [Cancel].
Are you sure you want to
delete the specified policy
file?
690000610
0WTo overwrite the file, click
[OK]. Otherwise, click
[Cancel].
The specified file already
exists. Do you want to
overwrite this file?
690010610
0WSelect the paths.No paths are selected.690020610
5ESet the SSID.Some of the SSIDs are not
set.
690030610
0WSet another SSID.The specified SSID is invalid.690040610
0WWhen selecting multiple
volumes, select the volumes
Either the emulation types or
the SLPR numbers or the both
690050610
that have the same emulationfor the multiple external
type and the same SLPR
number.
volumes you selected are not
the same. When selecting
multiple volumes, select the
volumes that have the same
emulation type and the same
SLPR number.
Remote Web Console Error Codes 95