HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 23 Error Codes — Part Code 0610 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EIf this problem persists, call
HP technical support.
An error occurred during
processing. If this problem
70600610
persists, call HP technical
support.
2EIf this problem persists, call
HP technical support.
An error occurred during
processing. If this problem
71110610
persists, call HP technical
support.
0iAn error occurred during the
indicated operation. See the
An error occurred. Check the
error code.
90050610
error code for each operation
in Preview List.
0WTo continue processing, click
[OK]. To stop processing,
click [Cancel].
Are you sure you want to
delete the selected row?
90600610
0iEnter the numerical value to
ExG again.
The available numerical
values for the ExG range
from 1 to 16,384.
91300610
0iTo continue processing, click
[OK]. To stop processing,
click [Cancel].
It takes time to execute the
request. Do you still want to
execute this request?
91310610
0iEnter the numerical value to
ExG.
The numerical value is not
entered to ExG.
93610610
5iThe extended shared memory
for XP External Storage needs
The extended shared memory
for External Storage is not
installed.
585200610
to be installed. Call HP
technical support.
0iIf you have performed the
Disconnect operation, click
Have you performed the
Disconnect operation?
590140610
[Yes]. If you have not
If you execute Delete Volume
without executing the
performed the Disconnect
operation, click [No]. To
Disconnect operation while
cancel the operation, click
[Cancel].
non-reflected data exists on
the cache, the non-reflected
data is not reflected to the
external volume.
0WClick [OK].The volume is mapped as a
mainframe volume by the
590150610
Add Volume operation.
Format the volume before
using it.
0iClick [OK].No emulation type is
selected. Select the emulation
type.
590160610
0iClick [OK].No LDEV is selected. Select
the LDEV.
590170610
0iClick [OK].The setting is insufficient for
automatic mapping. Check
590200610
the setting, and then retry the
operation.
0iRetry the operation.The automatic mapping
processing was interrupted.
590210610
Remote Web Console Error Codes 93