HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 22 Error Codes — Part Code 0605 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
571010605
persists, call HP technical
support.
5ECheck whether the
DKCMAIN microcode version
This function is not supported.582460605
and the SVP microcode
version are mismatched.
5ERestore the blocked path
status, and then retry the
operation.
All the paths to the external
volume are blocked.
582580605
5EMake the setting of the paths
to keep at least one path
No paths will be available,
if you change the setting of
paths.
582630605
available, and then retry the
operation.
5EExecute Check Path & Restore
Volume instead of Disconnect
paths or Check paths.
After Disconnect subsystem
or Disconnect volume is
executed, neither Disconnect
583300605
paths nor Check paths can
be executed.
5EIf this problem persists, call
HP technical support.
The path requested by
Disconnect paths or Check
paths was not found.
583310605
5EEnsure that the external
volume is not blocked, and
then retry the operation.
The external volume is
blocked.
583320605
5ERelease the XP Continuous
Access Journal or Universal
The Delete Volume operation
cannot be performed to the
584060605
Replicator for Mainframevolume being used by XP
pair, and then retry the
operation.
Continuous Access Journal or
Universal Replicator for
Mainframe.
5ERelease the journal volume of
the XP Continuous Access
The Delete Volume operation
cannot be performed to the
584070605
Journal, and then retry the
operation.
journal volume of XP
Continuous Access Journal.
5ERetry the operation after the
Cache Cleanup of the
Disconnect Subsystem or
Disconnect Volume cannot be
584080605
external volume completes
successfully.
performed, because the status
of the specified external
volume is Cache Cleanup.
If Cache Cleanup fails, call
HP technical support.
5EPut the external volume in
normal status by executing
The cache mode cannot be
changed when Disconnect
584090605
Check Path & RestoreSubsystem or Disconnect
Volume is in progress. Volume, and then retry the
operation.
5EConfirm the setting of the
bind mode by Cache
Residency Manager.
The cache mode cannot be
changed because bind mode
is set to the specified volume.
584100605
5EThe cache modes of the
volumes that compose the
The cache modes of the
volumes which compose the
584110605
LUSE volume are different.LUSE volume are different.
84 Remote Web Console for Storage System Messages and Error Codes