HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 1 Error Codes — Part Code 0001 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2ELock is removed. Lock again.Network error detected;
exclusive lock is released.
40200001
2EIf the same problem persists
despite retrying, call HP
technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
50130001
0WEnter correct user ID or
password.
The user ID or password is
invalid.
50140001
2WIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
50750001
persists, call HP technical
support.
2EIf the same problem persists
despite retrying, call HP
technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
50990001
1ELog on with a different user
ID. There is a possibility that
The specified user ID is
already logged on, or the
51320001
the termination process in theprevious logon was not
properly terminated. previous logon was invalid.
Try again later. (By default,
the session/RMI time-out is
one minute.)
(Terminated by clicking the
end button of the browser.)
After RMI Time-out (default 1
min.), log on again.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
53000001
persists, call HP technical
support.
2EIf the same problem persists
despite retrying, call HP
technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
53010001
3WWait a few seconds, and
then retry.
Since the SVP is busy, the
monitoring data cannot be
obtained.
54000001
Do either of the following if
two users are displaying the
Performance Monitor window
or running the Export Tool:
• Ask one of the users to
display another window.
• Ask one of the users to log
off.
• Wait for one of the users
to quit the Export Tool.
1ELog on again after waiting a
while.
An administrator is changing
a system environment file.
55080001
Log on again after waiting
for a while.
9WTo get back to the Modify
mode, click [OK]. Otherwise,
click [Cancel].
Modify mode released due
to inactivity. Do you want to
get back to the Modify
mode?
55090001
8 Remote Web Console for Storage System Messages and Error Codes