HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 18 Error Codes — Part Code 0410 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WAcquire the information
again, and retry the
operation.
Since the error occurred in
the install or uninstall judging,
the applying operation
cannot be performed.
550000410
0WCheck the length of the key
code.
The length of the key code is
incorrect.
550010410
0WCheck the file name and retry
the operation.
A file name is invalid due to
one of the following reasons:
550020410
• The file name is not
specified.
• The file name consists of
more than 200
characters.
• The file name includes an
inappropriate character.
0WCorrect the settings and retry
the operation.
Setting capacity exceeded
the remaining permitted
capacity.
552320410
5WIncrease the Permitted Volume
(Licensed Capacity).
Permitted Volume (Licensed
Capacity) is insufficient.
556470410
0WRetry the same operation
several times. If the same
Failed to refer to the license
key information.
570000410
error occurs, call HP technical
support.
3EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
593000410
persists, call HP technical
support.
5iConfirm the result of the
output of the license key, and
click [OK].
The output process of the
license key has completed.
593010410
5EConfirm the write permission
and other settings of the file
The file output process has
failed.
593020410
system, and specify other
directories or files.
5iTo continue processing, click
[OK]. Otherwise, click
[Cancel].
The specified file already
exists. Do you want to
overwrite the existing file and
then continue processing?
593030410
5iClick [OK] if the license key
output process is not
The output process of the
uninstalled license key has
593040410
required, and click [Cancel]
if the process is required.
not completed. Do you want
to exit?
5ESet the licensed capacity so
that the total will not become
Total of licensed capacities
cannot be set to 0 by deleting
593050410
0. To make the total 0,
execute Uninstall.
all licensed capacities
individually.
5ESet the amount of licensed
capacity to be reduced less
The licensed capacity cannot
be reduced because the
593060410
than the total capacity of thespecified amount of licensed
storage system or the licensed
capacity.
capacity to be reduced
exceeds the total capacity of
72 Remote Web Console for Storage System Messages and Error Codes