HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 16 Error Codes — Part Code 0405 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
persists, call HP technical
support.
3EIsolate the abnormal section
following the procedure
below:
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
80020405
1. Rebooting the computer
2. Checking the LAN
card/LAN cable
3. Checking the IP address
of the computer
4. Replacing the computer
5. Turning on, and then off
the DKC (care should be
taken.)
2EIsolate the abnormal section
following the procedure
below:
The subsystem status is
invalid. Call HP technical
support.
80030405
1. Rebooting the computer.
If this does not fix the
problem:
2. Checking the LAN
card/LAN cable. If this
does not fix the problem:
3. Checking the IP address
of the computer. If this
does not fix the problem:
4. Replacing the computer.
If a new computer does
not fix the problem:
5. Turn the DKC on, and then
off (care should be taken.)
2EContact HP technical support
for the plans of the program
The DKCMAIN microcode
does not support this program
product.
82020405
product to be supported by
DKCMAIN.
2ECall HP technical support.This program product needs
a later version of hardware.
Call HP technical support.
82030405
2EInstall additional shared
memory and enable the
program product.
To use the program product,
it needs to be enabled by
installing additional shared
memory.
82040405
2ECall HP technical support.This program product remains
in the configuration. Call HP
technical support.
82050405
5WStop using this program
product function.
This program product is in
use, you cannot uninstall this
program.
82060405
2ERetry this operation.The subsystem status is
invalid. Call HP technical
support.
83010405
6WDelete the allocated license
from the SLPR, and then
The specified program
product cannot be
552630405
Remote Web Console Error Codes 69