HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 14 Error Codes — Part Code 0305 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WCorrect the settings, and then
retry the operation.
0 cannot be specified in all
the fields.
656850305
5WCorrect the settings, and then
retry the operation.
The SVP OS does not support
IPv6.
656860305
Table 15 Error Codes — Part Code 0310
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WCorrect the specified content,
and retry.
Specify 0 or above but below
256 in each field.
50100310
5WCorrect the specified content,
and retry the operation.
0 cannot be specified in all
the fields or the Class A field.
50110310
5WReduce the number, and
retry.
The maximum number of IP
Address is 32.
50400310
5WReduce the number, and
retry.
The maximum number of
Community name is 32.
50410310
5WCheck the content of the
operation.
This Community name is
already in use.
50500310
5WCheck the content of the
operation.
This IP address is already in
use.
50510310
5WThis item will be deleted. Do
you want to continue?
90600310
5WCorrect the settings, and then
retry the operation.
Specify a value between 0 to
FFFF in each field.
656840310
5WCorrect the settings, and then
retry the operation.
0 cannot be specified in all
the fields.
656850310
5WCorrect the settings, and then
retry the operation.
The OS being used does not
support Ipv6.
656860310
5WCorrect the settings, and then
retry the operation.
Specify a value between 0 to
256 in each field for IPv4.
656870310
Specify a value between 0 to
FFFF in each field for IPv6.
5WClick [Apply] and apply the
setting information, or
The information being set has
not been applied to the
657100310
[Cancel] and discard thedevice yet. Apply the
setting information, and retry
the operation.
information to the device,
and then retry the operation.
5WClick [OK] to continue the
operation.
Test Trap will be sent to the
registered community. Do you
690590310
want to continue the
operation?
5WConfirm that the Trap has
been received.
Trap transmission completed.
Wait for a while and check
the reception of the Trap.
690600310
Remote Web Console Error Codes 63