HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 10 Error Codes — Part Code 0110 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
1EContact the storage
administrator and request to
allocate the license of SLPR.
There are no valid program
products. Contact the storage
administrator and request to
allocate the license of SLPR.
556040110
1EInstall the supported version
of JRE.
The unsupported JRE version
is used. Install the supported
565030110
version of JRE, and then retry
the operation.
7EReturn to the Modify mode
and change the configuration
again.
Modify mode released due
to inactivity. Another user or
service engineer may have
565580110
changed the configuration
while the Modify mode was
released. Get back to the
Modify mode and change the
configuration again. Set the
“RMI time-out period for
Modify” by using the “Set
Env.” dialog box located on
the Control Panel of the
Remote Web Console to
change the time-out period
for Modify mode.
2ELog off from Remote Web
Console. Then log on to
An error occurred regarding
screen display. Log off from
570110110
Remote Web Console againRemote Web Console. After
and check whetherthat, please log on to Remote
configuration changes have
been made correctly.
Web Console again and
check whether configuration
If configuration changes have
been made correctly, there is
no problem.
changes have been made
correctly.
If configuration changes have
been made incorrectly, retry
the operation.
1EIf this problem persists, call
HP technical support.
The configuration information
is incorrect. Call HP technical
support.
585800110
0WWait for a while, and then
click [OK] and change the
mode to Modify.
The storage system is in
internal process, or some
other user is changing the
590020110
configuration. Wait for a
while, and then click [OK]
and change the mode to
Modify. Do you want to retry
the operation to change the
mode to Modify?
5iReply to the message.Succeeded to change the
mode to Modify.
590030110
0iTo refresh all the
configuration information,
Do you want to refresh all the
configuration information?
591050110
click [OK]. Otherwise, click
[Cancel].
5WReply to the message.An error occurred regarding
screen display. Select the
650920110
Remote Web Console Error Codes 51