HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 87 Error Codes — Part Code 9605 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
that of the external volume
with which the logical volume
is mapped.
1. Execute the Volume
Initialize operation on the
external group to which
the logical volume belongs
in the Customized Volume
window, and create a
volume having the same
capacity as the external
volume.
2. Execute the Make Volume
operation on the external
group to which the logical
volume belongs in the
Customized Volume
window, and create a
volume having the same
capacity as the external
volume.
5EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
584509605
persists, call HP technical
support.
5ECheck the logical volume
configuration, and then retry
the operation.
This logical volume cannot be
selected because it is used as
a volume for System Disk.
680029605
Table 88 Error Codes — Part Code 9610
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EIf this problem persists, call
HP technical support.
An error occurred during
processing. If this problem
70609610
persists, call HP technical
support.
3EIf this problem persists, call
HP technical support.
There is an invalid value in
the Data Retention Utility
information.
74429610
6WMount volumes, and then
retry the operation.
There is no valid volume.81129610
0iTo continue processing, click
[OK]. To stop processing,
click [Cancel].
The value that is under setup
is not reflected yet. Do you
want to continue the
operation?
91079610
0iTo change the mode, click
[OK]. Otherwise, click
[Cancel].
Do you want to change the
expiration lock mode?
93629610
0iCorrect the retention term,
and then retry the operation.
The specified retention term
exceeds the maximum.
93639610
3EIf this problem persists, call
HP technical support.
There is an invalid value in
the Extent information.
584059610
0WTo set VMA, click [OK].
Otherwise, click [Cancel].
If you set VMA, all the data
or part of the data written in
591069610
the logical volume will be
426 Remote Web Console for Storage System Messages and Error Codes