HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 87 Error Codes — Part Code 9605 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5ERelease the access attribute
of the extent.
An access attribute is set to
the specified extent.
584339605
5ERetry a little later.This logical volume is busy.584349605
5ERetry a little later.This logical volume is busy.584359605
5ESee the Data Retention Utility
window and check the
The access attribute of the
logical volume has already
been changed.
584369605
following about the logical
volume you have selected:
• The access attribute must
be Read/Write
• The logical volume must
be able to be specified as
an S-VOL
• You must be able to set a
path to the logical volume
using the RAID Manager
or Remote Web Console
• No mode is set using the
RAID Manager
5ESelect a logical volume
without VMA.
VMA is set to the logical
volume.
584379605
5ECheck the logical volume
configuration, and then retry
the operation.
This logical volume is
configured as a command
device.
584389605
5ESelect a logical volume
whose emulation type is
OPEN-V.
The emulation type of the
logical volume is not
OPEN-V.
584429605
5ESpecify an open-system
volume.
The logical volume is a
mainframe volume.
584439605
5ERelease the pair state or set
up the VMA on another
logical volume.
A VMA cannot be set up on
this logical volume because
XP Continuous Access,
584449605
Business Copy, or XP
Continuous Access Journal is
using the logical volume.
5ERelease the XP Business Copy
pair, or set up the VMA on
another logical volume.
A VMA cannot be set up on
this logical volume because
Business Copy is using the
logical volume.
584459605
5ESelect other logical volumes
without VMA, or delete the
The command was rejected,
because you tried to set VMA
584479605
path of the specified logicalto a logical volume with a
path set on. volume, and then retry the
operation.
5ERetry the operation after the
logical volume has recovered
The specified logical volume
is blocked, or the LDEV is
being formatted or shredded.
584489605
from the blocked status or
after the LDEV has been
formatted or shredded.
5EDo one of the following:The capacity of the logical
volume is not the same as
584499605
Remote Web Console Error Codes 425