HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)
Table 76 Error Codes — Part Code 8510 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WMigrate all parity groups in
the CLPR to another CLPR,
and then delete the CLPR.
The CLPR that has some
parity groups cannot be
deleted. Migrate all parity
556368510
groups in the CLPR to another
CLPR, and then delete the
CLPR.
3EIf you clicked [Yes], perform
the operation after you set up
The partition configuration
may contain some
inconsistent information.
570018510
a SLPR name and other
To initialize partition
configuration, select the Yes
button.
changes. If you clicked [No],
restart the operation. If this
problem persists, contact the
system management.
To stop the operation, select
the No button.
0WCheck the settings.The maximum number of
SSIDs that can be registered
590678510
will be registered except the
duplicate SSIDs.
0iNotice from Partition
Definition:
Notice from Partition
Definition
590688510
Check the settings.
Any statements of the
following are displayed in
%s.
• Installation of XP
Disk/Cache Partition is
required to create more
than four SLPRs or CLPRs.
• Additional Cache Memory
is required for CLPR0 to
create a CLPR.
• Maximum number of
SLPRs exists.
• Maximum number of
CLPRs exists.
0iCheck the settings.The SSID(s) are associated
with the specified CU. All
591018510
SSIDs that are associated
with the CU are to be added
to this SLPR.
0iCheck the settings.The SSID(s) are associated
with the specified CU. All
591028510
SSIDs that are associated
with the CU are to be deleted
from this SLPR.
Remote Web Console Error Codes 407