HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 74 Error Codes — Part Code 8505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5EConfirm that no user is
logged into Remote Web
While another user is logged
into Remote Web Console,
565278505
Console, and then retry the
operation.
you cannot edit the
information of the SLPR that
the user owns. SLPR No:%s
5WPurchase a license if the
permitted volume of the SLPR
is insufficient.
The installation status of the
SLPR has changed.
Check the installation status
of the SLPR on the license key
partition definition window.
565368505
4EIf this problem persists, call
HP technical support.
An unknown error was
detected.
570028505
6EIf this problem persists, call
HP technical support.
Some of the shared memory
of the storage system may be
583108505
blocked, or the storage
system is being maintained.
Check the status of the
storage system. If this
problem persists, call HP
technical support.
6EIf this problem persists, call
HP technical support.
Some of the cache memory
of the storage system may be
583118505
blocked, or the storage
system is being maintained.
Check the status of the
storage system. If this
problem persists, call HP
technical support.
5iWait until the write pending
rate falls, and then retry the
operation.
The configuration cannot be
changed because the write
pending rate of the intended
583128505
CLPR is too high. Wait until
the write pending rate falls,
and then retry the operation.
5iCheck the Cache Residency
Manager size and the
The configuration cannot be
changed because the
583138505
number of Cache Residency
Manager areas.
available Cache Residency
Manager size or the number
of Cache Residency Manager
areas in the intended CLPR is
insufficient. Check the Cache
Residency Manager size and
the number of Cache
Residency Manager areas.
6WRetry the operation after the
maintenance job is
completed.
A maintenance job is running
in the storage system
(Correction Copy, Drive
583158505
If LDEV formatting, LDEV
shredding or Extent
Copy, LDEV formatting, LDEV
shredding, and Extent
shredding). Retry the
shredding is not operating,
call HP technical support.
operation after the
maintenance job is
completed.
5WWait a few seconds, and
then retry the operation.
Parity groups in CLPR are
being migrated in the storage
583168505
404 Remote Web Console for Storage System Messages and Error Codes