HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 74 Error Codes — Part Code 8505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
retrying, call HP technical
support.
5ESpecify the correct port name
(port number), and then retry
The specified port name (port
number) is invalid.
550268505
the operation. If this problem
persists, call HP technical
support.
5ECorrect the settings of the
cache size, and then retry the
The cache size is incorrect.
CLPR No:%s(SLPR No:%s)
550278505
operation. If this problem
persists, call HP technical
support.
5ESet the cache size to be
equal to or greater than the
The specified cache size
excluding the Cache
550288505
required minimum value, andResidency Manager size is
then retry the operation. If thisless than the minimum
required. problem persists, call HP
technical support.
CLPR No:%s(SLPR No:%s)
5ESet the cache size correctly,
and then retry the operation.
The total cache size is
incorrect.
550298505
If this problem persists, call
HP technical support.
5EAssign a different port name
(port number), and then retry
The same port is already
registered in a different SLPR.
550338505
the operation. If this problem
persists, call HP technical
support.
5EInstall the program product.This function is not available.
Disk/Cache Partition is
552288505
required to create SLPR or
CLPR.
4EContact the storage
administrator. (To the storage
The login information for the
partition management
565018505
administrator: Reconfigure thefunction has been initialized
login information.) If thisdue to detection of conflicting
problem persists, call HP
technical support.
information. Contact the
storage administrator. (To the
storage administrator:
Reconfigure the login
information.)
4WThe operation to set the
maximum number of
The operation to set the
maximum number of
565028505
connections has beenconnections has been
cancelled because an attemptcancelled because an attempt
was made to specify a valuehas been made to specify this
that is less than the numbervalue to less than the number
of users who are currentlyof users who are currently
connected. Check theconnected. Check the
maximum permissible number
of connections.
maximum permissible number
of connections.
3ESelect another window. To
set this function, contact the
storage administrator.
This function cannot be used
by the storage partition
administrator.
565248505
Remote Web Console Error Codes 403