HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 74 Error Codes — Part Code 8505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
If this problem persists, call
HP technical support.
SLPR No:%s
SLPR No:%s
5ESet the correct value for the
maximum number of
The value set as the maximum
number of connections to
550168505
connections to the SLPR, andeach SLPR is invalid. SLPR
No:%s then retry the operation. If this
problem persists, call HP
technical support.
5ESet the correct value for the
total of the maximum
The total of the values
registered as the maximum
550178505
allowable user connections,number of users that can
and then retry the operation.connect to each SLPR exceeds
If this problem persists, call
HP technical support.
the value set as the maximum
number of connections to the
subsystem.
5EDelete the SSIDs that are no
longer necessary, and then
The number of SSIDs exceeds
the maximum that can be
registered.
550188505
retry the operation. If this
problem persists, call HP
technical support.
5ECorrect the SSID setting, and
then retry the operation. If this
An invalid SSID was
detected.
550198505
problem persists, call HP
technical support.
5EAssign a different SSID, and
then retry the operation. If this
The same SSID is already
registered in a different SLPR.
550208505
problem persists, call HP
technical support.
5ESpecify the correct CU
number, and then retry the
The specified CU number is
invalid.
550218505
operation. If this problem
persists, call HP technical
support.
5ECorrect the CLPR settings,
and then retry the operation.
An attempt has been made
to either register newly a
550228505
If this problem persists, call
HP technical support.
CLPR that is already
registered, or delete a CLPR
that is not registered.
5ECorrect the SLPR settings, and
then retry the operation. If this
An attempt has been made
to either register newly a
550238505
problem persists, call HP
technical support.
SLPR that is already
registered, or delete a SLPR
that is not registered.
5ESpecify a different parity
group, and then retry the
Some parity groups are
already registered in a
different CLPR.
550248505
operation. If the same
problem persists despite
retrying, call HP technical
support.
5ECorrect the settings of parity
group, and retry the
The incorrect settings of parity
group are contained.
550258505
operation. If the same
problem persists despite
402 Remote Web Console for Storage System Messages and Error Codes