HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 67 Error Codes — Part Code 8105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6ECheck the status of the disk
storage system (for example,
The status of the storage
system requires maintenance
20118105
the storage system is blocked,(for example, the subsystem
the shared memory isis blocked, the shared
inconsistent, or some othermemory is inconsistent, or
some other problem occurs). problem occurs). If this
Call HP technical support.
problem persists, call HP
technical support.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
20138105
persists, call HP technical
support.
6EA communication error
occurs. If the error occurs
An error occurred while
connecting to the subsystem.
20158105
after retrying, call HP
technical support.
Wait for a while, and then
retry the operation.
6EThe host is mounted or the
device is reserved. Unmount
Processing is disabled
because the host is mounted
or the device is reserved.
20828105
the host and cancel
reservation of the device. For
AIX hosts, unmount the host
and execute the varyoffvg
command.
2ECheck the DKC status and the
current status of the
The subsystem status is
invalid. Call HP technical
support.
20838105
configuration setting. If
necessary, re-execute the
setting operation.
2ECheck the DKC status and the
current status of the
The subsystem status is
invalid. Call HP technical
support.
20848105
configuration setting. If
necessary, re-execute the
setting operation.
6EStop executing I/Os, and
then retry the operation.
The host specified by the
WWN is performing I/O
operations.
20978105
6EDelete or suspend all pairs to
which the journal volumes
belong.
Devices to be maintained
include journal volumes.
Delete or suspend all pairs to
22048105
which the journal volumes
belong.
6EDelete all pairs to which the
journal volumes belong.
Devices to be maintained
include journal volumes.
22058105
Delete all pairs to which the
journal volumes belong.
5WRelease the reserved attribute
of the target volume by using
Data Retention Utility.
No settings can be made
because of a volume reserved
for RAID Manager.
25048105
6ECall HP technical support and
finish adding volumes.
No path can be set to the
specified volume because the
25108105
addition of volumes is not
finished.
6ERelease the pair definition or
delete command devices
One of the following is
defined: a XP Continuous
25158105
Remote Web Console Error Codes 391