HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 67 Error Codes — Part Code 8105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6ESelect another volume.The specified volume contains
Pool-VOLs.
19118105
6ECorrect the settings, and then
retry the operation.
The specified volume is a
remote command device, and
19128105
therefore the command
device setting or the
command device security
setting cannot be set or
released.
6EDelete the external volume
that is mapped to the external
An external volume is
mapped to the external port
19188105
port to be operated, and then
retry the operation.
to be operated. Delete the
external volume that is
mapped to the external port
to be operated, and then
retry the operation.
6ECheck the volume, and then
retry the operation.
The specified volume is not a
LUSE volume.
19218105
6ECheck the setting.The path cannot be set to the
specified volume, because
19268105
the volume is being used as
a quorum disk.
6ECheck the setting.The specified volume cannot
be set as a command device,
19278105
because it is being used as a
quorum disk.
6WSet Host Mode Option 60 to
OFF, and then execute
Addition or deletion of paths
for LUN0 cannot be done
19288105
addition or deletion of paths
for LUN0.
because Host Mode Option
60 is set to ON. Also, setting
change of Host Mode Option
60 and path change
(addition or deletion) for
LUN0 cannot be done at the
same time. Execute the
changing operations
separately.
2EUse the SVP to check if the
DKC is in the normal status,
An error occurred during SVP
processing. If this problem
20038105
and then retry. If the samepersists, call HP technical
support. problem persists despite
retrying, call HP technical
support.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
20058105
persists, call HP technical
support.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
20098105
persists, call HP technical
support.
6ECheck if I/O from the host to
target path/volume does not
occur.
The LDEV is used by the
HOST, or an error occurred
in the server procedure.
20108105
390 Remote Web Console for Storage System Messages and Error Codes