HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 67 Error Codes — Part Code 8105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6EThe port you are trying to set
is for XP Continuous Access.
The host mode of the host
group connected to the
13558105
You must change the attributeInitiator port cannot be
changed. (Target or RCU Target) when
adding a WWN.
6EThe port you are trying to set
is for XP Continuous Access.
The host group cannot be
added to the Initiator port.
13568105
You must change the attribute
(Target or RCU Target) when
adding a host group.
6EThe specified Port is for Fibre
XP Continuous Access. Delete
S-VOLs remain on the
Fibre-RCU port. This
13578105
a logical path, and then retry
the operation.
operation may cause a fatal
damage to the S-VOLs. Stop
this operation. To continue
this operation, remove the
S-VOLs from the RCU port
first.
6ECheck the attributes of the
external volumes, and then
retry the operation.
The LUSE volume cannot be
configured because the
external volumes do not have
the same cache mode.
13628105
5WCheck the port type, and then
retry the operation.
The port type is incorrect.13648105
3WCheck the setting of the host
mode option.
The specified host mode
option can be set only for a
specific port attribute.
13698105
6EInstall the necessary program
product. When an SLPR is
This functionality is not
available. LUN Manager is
required.
16008105
allocated, install a necessary
program product for the
SLPR.
6EInstall the necessary program
product. When an SLPR is
This functionality is not
available. Open Volume
Management is required.
16018105
allocated, install a necessary
program product for the
SLPR.
6ESelect another volume.The specified volume cannot
be assigned as a LUSE
19048105
volume or a command
device, and the path of the
volume cannot be set
because it is being used as a
Pool volume.
6ESelect another volume.There are virtual volumes and
non-virtual volumes in the
19058105
volumes specified to compose
a LUSE volume.
6ESelect another volume.The specified volume cannot
be set as a command device
19068105
because it is being used as a
V-VOL for XP Snapshot.
6ESelect another volume.The specified volume contains
XP Snapshot pairs.
19108105
Remote Web Console Error Codes 389