HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 67 Error Codes — Part Code 8105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
cannot be processed in this
agent. The error does not
occur normally because it is
guarded in the screen. In the
unlikely event that this error
occurs, contact HP technical
support.
2EHost mode is invalid. (The
specified value is not in the
An error occurred. If this
problem persists, call HP
technical support.
10228105
specification.) The error does
not occur normally because
it is guarded in the screen. In
the unlikely event that this
error occurs, contact HP
technical support.
5WCorrect the specified content,
and issue the request again.
The specified fiber address is
wrong.
10238105
(Currently, Bad Value Send
report in Set Response.)
2EFibre topology information is
invalid. (The specified value
An error occurred. If this
problem persists, call HP
technical support.
10248105
is not in the specification.)
The error does not occur
normally because it is
guarded in the screen. In the
unlikely event that this error
occurs, contact HP technical
support.
6EThe configuration information
has been already changed.
The specified LU path does
not exist.
10258105
Check the settings, and
request the setting of the
configuration information
again.
6EThe configuration information
has been already changed.
The number of volumes you
intend to combine into a
10288105
Check the settings, and
request the setting of the
LUSE volume exceeds the
maximum.
configuration information
again.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
10298105
persists, call HP technical
support.
6EThe configuration information
has been already changed.
The following volumes cannot
be specified when you
10508105
Check the settings, and
request the setting of the
change expanded LU
configurations:
• Volumes reserved by Auto
LUN
configuration information
again.
2EYou are trying to perform
LUN Security operation for
LUN Manager function (LUN
security) settings are given to
10598105
non-Fibre port. The error doesthe ports other than Fibre
ports. not occur normally because
Remote Web Console Error Codes 383