HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 67 Error Codes — Part Code 8105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
• Volumes reserved by Auto
LUN
• System Disk volume
6ECheck the setting.Failed to remove the path.
The specified path is the last
10078105
path of the volumes used for
XP Continuous Access,
Business Copy, Auto LUN, or
XP Snapshot.
6EThe configuration information
has been already changed.
The emulation type of the
volumes is not for open
10098105
Check the settings, and
request the setting of the
systems, or the volumes are
not mounted. Check the
setting.
configuration information
again.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
10108105
persists, call HP technical
support.
2EThe volume which links as an
expanded LU extend over
An error occurred. If this
problem persists, call HP
technical support.
10118105
CU#. The error does not
occur normally because it is
guarded in the screen. In the
unlikely event that this error
occurs, contact HP technical
support.
6EThe configuration information
has been already changed.
LU path is set to a volume
which links as an expanded
LU.
10128105
Check the settings, and
request the setting of the
configuration information
again.
2EThe emulation type of a
volume which links as an
The emulation types of the
volumes combined into a
10138105
expanded LU is not the same.LUSE volume are not the
same. The error does not occur
normally because it is
guarded in the screen. In the
unlikely event that this error
occurs, contact HP technical
support.
6EThe configuration information
has been already changed.
LU path is set to the releasing
expanded LU. (You need to
10158105
Check the settings, and
request the setting of the
release the expanded LU and
path at the same time.)
configuration information
again.
2EThe specified port does not
exist. You have specified a
An error occurred. If this
problem persists, call HP
technical support.
10188105
wrong port number. Or the
specified port type
(exclusively for mainframe)
382 Remote Web Console for Storage System Messages and Error Codes