HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 66 Error Codes — Part Code 8005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
3EAn error occurred on the
DKC side. If this problem
An error occurred on the
DKC side. If this problem
687618005
persists, call HP technical
support.
persists, call HP technical
support.
6EInstall the required program
product.
This functionality is not
available. DKA Encryption
License Key is required.
687628005
6EInstall the Encryption DKA.This function cannot be used
because the encryption
function is not supported.
687658005
6EUse the correct DKA
Encryption License Key.
The serial number of the DKA
Encryption License Key does
not match.
687668005
6ECheck the specified parity
group.
The specified parity group is
not mounted.
687858005
6ECheck the status of the
specified parity group.
The specified parity group is
not blocked.
687868005
Table 67 Error Codes — Part Code 8105
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6ESelect another volume.The specified volume cannot
be set as a command device
10028105
or a component of a LUSE
volume, because it is being
used as the volume of XP
Continuous Access, Business
Copy, Auto LUN, or XP
Snapshot. Select another
volume.
6EThe configuration information
has been already changed.
You are trying to set multiple
paths to the same volume
from one group.
10038105
Check the settings, and
request the setting of the
configuration information
again.
6EThe configuration information
has been already changed.
Multiple volumes are
specified to a single port,
group or LUN combination.
10048105
Check the settings, and
request the setting of the
configuration information
again.
6ECheck the settings, and then
retry the operation.
The following volumes cannot
be specified when you
10058105
change the path
configurations:
• Volumes that do not exist
• Volumes other than the top
LUs in expanded LUs
Remote Web Console Error Codes 381