HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 66 Error Codes — Part Code 8005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
of Cache Residency Manager
areas.
CLPR No:%s
6ECheck the settings, and then
retry the operation.
The total number of Cache
Residency Manager areas set
552468005
for the CLPRs and the
maximum number of the
Cache Residency Manager
areas in the subsystem are
not equal.
6ECheck the settings, and then
retry the operation.
The Cache Residency
Manager size set for the
552478005
CLPR is not a multiple of 512
MB.
CLPR No:%s
6ECheck the settings, and then
retry the operation.
The mainframe volume is set
for the SLPRs other than SLPR
0.
552518005
CU:LDEV=%s:%s
6ECheck the settings, and then
retry the operation.
The parity group that contains
the volume(s) to which Cache
552658005
Residency Manager is set
cannot be migrated to
another CLPR.
Remove the Cache Residency
Manager settings from the
volumes, and then migrate
the parity group.
CLPR No:%s
3EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
563018005
persists, call HP technical
support.
3EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
563028005
persists, call HP technical
support.
3EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
563038005
persists, call HP technical
support.
3ESelect another window. To
set this function, contact the
storage administrator.
This function cannot be used
by the storage partition
administrator.
565248005
3ETo continue the operation,
contact the storage
Because the settings across
the multiple SLPRs are
565258005
administrator and have thecontained, the authority has
settings across the multiplebeen shifted to the storage
SLPRs cancelled, and then
retry the operation.
administrator from the
storage partition
To perform other operations,
select a function button.
administrator. To continue the
operation, contact the
Remote Web Console Error Codes 379