HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 65 Error Codes — Part Code 7110 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EIf this problem persists, call
HP technical support.
An error occurred during
processing. If this problem
74407110
persists, call HP technical
support.
4ERetry the operation. If you get
the same message again,
A time-out error occurred.
Wait for the subsystem to
80017110
reboot the computer. Ifrecover to the normal
necessary, call HP technical
support.
condition, and then retry the
operation.
0iCall HP technical support.An internal logic
contradiction occurred.
85347110
0ECheck the error code in
Preview list.
Some settings could not be
applied normally. See the
error code.
86587110
0iCheck the contents, and retry.There is no volume.86597110
0iThe operation was ended
normally. Execute the next
operation.
The requested operation has
completed.
90027110
0iAn error occurred during the
indicated operation. See the
An error occurred. Check the
error code.
90057110
error code for each operation
in Preview List.
0iTo cancel, click [OK].Do you want to cancel?91017110
0iClick [OK] to execute the
operation.
Do you want to apply?91027110
0WTo continue processing, click
[OK]. Otherwise, click
[Cancel].
The option has been
changed. If you continue
processing before applying
91087110
the change, the option will
be reset to the current setting.
Do you want to continue
processing?
2WTo continue processing, click
[OK]. Otherwise, click
[Cancel].
Do you want to execute the
Set Over operation?
91097110
2WTo continue processing, click
[OK]. Otherwise, click
[Cancel].
Do you want to execute the
Initialize operation?
91107110
0iTo continue processing, click
[OK]. To stop processing,
click [Cancel].
Do you want to enable the
setting to expand the number
of relationships?
93777110
0iTo continue processing, click
[OK]. To stop processing,
click [Cancel].
Do you want to disable the
setting to expand the number
of relationships?
93787110
0iCheck the selected T-VOLs.The selected T-VOLs include
a volume or volumes that
is/are paired.
550037110
0iCorrect the number of
selected S-VOLs and T-VOLs.
The number of selected
S-VOLs doesn't match the
550047110
number of selected T-VOLs.
Remote Web Console Error Codes 375