HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 64 Error Codes — Part Code 7105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iSelect a different volume or
release the consistency group
setting.
The command has been
rejected because the cascade
request for creating cascade
580007105
pairs composed of volumes
belonging to the same
consistency group was
issued.
0iWait until the L1 pair status
changes to Split, and then
retry the operation.
The Add Pair command for
adding the L2 pair has been
rejected because the L1 pair
is in V-Split status.
580017105
0iQuick restore operation
cannot be performed when
The Quick Restore command
has been rejected because
580027105
the pair is composed of athe specified pair is
normal volume and acomposed of a normal
customized volume (CV).
Select a different pair.
volume and a customized
volume (CV).
0iTo continue the operation,
delete the XP Continuous
Access pair.
The command has been
rejected because a XP
Continuous Access pair exists
in the same subsystem frame.
580037105
0iThe requested operation
cannot be performed. Check
The command has been
rejected because the issued
580047105
the status of the specified
volume.
request is an operation that
cannot be performed with a
volume that can be used from
either the mainframe or
open-system hosts.
0iDelete the XP Continuous
Access pair or execute the
operation by other pairs.
The Quick Restore command
has been rejected, because
the specified pair contains
582597105
internal and external volumes,
and also is used as a XP
Continuous Access pair.
5WThe requested command
cannot be executed with the
The command has been
rejected, because the
582607105
current status of the TrueCopy
for Mainframe pair.
specified S-VOL is used as a
M-VOL of TrueCopy for
Mainframe pair.
See the Interoperability with
Other Products and Functions
section in the Hitachi
ShadowImage™ for
Mainframe User's Guide: HP
XP24000 Disk Array, HP
XP20000 Disk Array for the
relationship between the state
of TrueCopy for Mainframe
pair and the ShadowImage
for Mainframe operations.
5WThe requested command
cannot be executed with the
The command has been
rejected, because the
582617105
current status of the TrueCopyspecified S-VOL is used as a
for Mainframe pair. See theR-VOL of TrueCopy for
Mainframe pair.. Interoperability with Other
Products and Functions
section in the Hitachi
368 Remote Web Console for Storage System Messages and Error Codes