HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 64 Error Codes — Part Code 7105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
in Cache Residency Manager
for Mainframe.
Manager for Mainframe
setting for the operation.
0iWait until Reverse Copy or
Quick Restore completes.
The command has been
rejected, because the pair
86407105
sharing the S-VOL was in the
Reverse Copy or Quick
Restore status.
0iYou cannot execute the
specified operation. Release
The pairs contain a pair in
the Reverse Copy status.
86417105
the Reverse Copy for the
operation.
5WThe Resynchronize Volume
Pair operation cannot be
The Resynchronize Volume
Pair operation has been
86437105
executed in the current pairrejected, because the
status. See the Adding Pairsspecified pair is not in the
state of Split. and Resynchronize Pair
Operations sections in the
Hitachi ShadowImage™ for
Mainframe User's Guide: HP
XP24000 Disk Array, HP
XP20000 Disk Array for the
relationship between the state
of pairs and the
ShadowImage for Mainframe
operations.
0iCheck the pair status.The command has been
rejected, because the pair
status is not Split or Suspend.
86447105
0iYou cannot execute the
specified operation. Release
The Reverse Copy command
has been rejected, because
86457105
the XP Continuous Access
pair for the operation.
the S-VOL is shared as the
M-VOL of a XP Continuous
Access pair.
0iDelete the XP Continuous
Access pair.
The Reverse Copy request
was rejected, because the
86467105
S-VOL was shared with a XP
Continuous Access pair in the
non-suspend status.
0iDelete the XP Continuous
Access pair.
The Reverse Copy command
has been rejected, because
86477105
the T-VOL is shared with an
M-VOL of a XP Continuous
Access pair.
0iCheck the specified volume
number.
The boot device and the
S-VOL do not match in the
AddPair command.
86487105
0iCheck the specified volume
number.
Because the boot device is
the T-VOL in the DeletePair
86497105
command, the flag does not
match.
0iCheck the specified volume
number.
The boot device and the
S-VOL do not match in the
86507105
AddPair, Resync, or
DeletePair command.
Remote Web Console Error Codes 365