HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 64 Error Codes — Part Code 7105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
used as a reserved volume.
Specify another volume.
specified volume is used as a
R-VOL of TrueCopy for
Mainframe pair.
5WConfirm whether the volumes
specified for S-VOL and
T-VOL are correct.
The command has been
rejected, because there is no
pair available.
86247105
0iCheck the specified volume
number.
The P-VOL(S-VOL) and
S-VOL(T-VOL) have the same
number.
86257105
0iAfter the high-speed Split is
completed, retry the
operation.
The Simplex command was
rejected, because the
high-speed Split was in
progress.
86267105
0iWait until the status of the
pair changes to Split.
The Pairresync operation has
been rejected, because pair
status is SP-Pend.
86277105
0iSelect other pairs.The operation of the L1 pair
failed because the L2 pair
was in F-COPY status.
86287105
0iCheck the contents, and retry.The status mode specification
is invalid.
86297105
0iCheck the contents, and retry.The status mode type is
invalid.
86307105
0iCall HP technical support.The specified CU number is
invalid.
86317105
0ECall HP technical support.The timing of issuing the
command is invalid.
86327105
0ECall HP technical support.The abnormal status is
invalid.
86337105
0iSpecify other volumes, or
release the XP Auto LUN
setting.
The volume specified as a
reserved volume is already
defined as a reserved volume
for Auto LUN.
86347105
0iSpecify other volumes, or
release the XP Auto LUN
setting.
The specified S-VOL is
defined as a reserved volume
for Auto LUN.
86357105
0iSpecify other volumes, or
release the XP Auto LUN
setting.
The specified T-VOL is defined
as a reserved volume for Auto
LUN.
86367105
0iSpecify other volumes, or
release the XP Auto LUN
setting.
The specified S-VOL is used
as a source volume for Auto
LUN.
86377105
0iYou cannot execute the
specified operation. Release
The command has been
rejected, because the
86387105
the Cache Residencyspecified S-VOL is set for use
Manager for Mainframe
setting for the operation.
in Cache Residency Manager
for Mainframe.
0iYou cannot execute the
specified operation. Release
The command has been
rejected, because the
86397105
the Cache Residencyspecified T-VOL is set for use
364 Remote Web Console for Storage System Messages and Error Codes