HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 63 Error Codes — Part Code 7010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iClick [OK] to execute the
operation.
Do you want to apply?91027010
0WTo continue processing, click
[OK]. Otherwise, click
[Cancel].
The option has been
changed. If you continue
processing before applying
91087010
the change, the option will
be reset to the current setting.
Do you want to continue
processing?
2WTo continue processing, click
[OK]. Otherwise, click
[Cancel].
Do you want to execute the
Set Over operation?
91097010
2WTo continue processing, click
[OK]. Otherwise, click
[Cancel].
Do you want to execute the
Initialize operation?
91107010
0WCheck the device emulation
and the definition of the SCSI
path.
There are no valid volumes.93037010
0iCheck the selected S-VOLs.The selected S-VOLs include
a volume or volumes that
is/are paired.
550037010
0iCorrect the number of
selected P-VOLs and S-VOLs.
The number of selected
P-VOLs doesn't match the
550047010
number of selected S-VOLs.
Correct the number of
selected P-VOLs and S-VOLs.
0iTo continue the operation,
click [OK].
The CLPR used for the P-VOL
differs from the CLPR used for
590007010
the S-VOL. Do you want to
continue this operation?
0iTo continue the operation,
click [OK].
The P-VOL and the S-VOL
belong to different SLPRs. Do
590487010
you want to continue this
operation?
0iTo continue the operation,
click [OK].
The P-VOL and the S-VOL
belong to different SLPRs. If
590697010
you perform this operation,
the storage partition
administrator will become
unable to operate.
Do you want to continue this
operation?
5WClick [OK], and then continue
the operation.
Information was updated by
other users. The list will scroll
to the top.
661027010
354 Remote Web Console for Storage System Messages and Error Codes