HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 63 Error Codes — Part Code 7010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WCheck the password.The password is invalid.51237010
0WMultiple volumes cannot be
processed in the operation.
Process one volume at a time.
You cannot select more than
one operation at a time.
51247010
0WSelect the target volume.No target volume is selected.51257010
0WYou cannot create L2 pair for
the specified P-VOL. Delete
You cannot create another L2
pair, because the number of
51267010
the created L2 pair, and retry
the operation.
L2 pairs exceeds the
maximum.
0iSelect the other MU number.The specified MU number is
invalid. Select another MU
number.
51277010
0iYou cannot create L1 pair for
the specified P-VOL. Delete
The number of L1 pairs
exceeds the maximum.
65047010
the created L1 pair, and retry
the operation.
0iYou cannot create L2 pair for
the specified P-VOL. Delete
The number of L2 pairs
exceeds the maximum.
65057010
the created L2 pair, and retry
the operation.
0ECall HP technical support.Unregistered error code.73107010
0WWait a few seconds, and
retry the operation. If the
The settings could not be
applied.
73117010
error occurs after retrying,
call HP technical support.
0ECall HP technical support.The password could not be
acquired.
73127010
0ECall HP technical support.Error details not available.73137010
2EIf this problem persists call HP
technical support.
An error occurred during
processing. If this problem
74407010
persists, call HP technical
support.
0ECall HP technical support.An internal logic
contradiction occurred.
85347010
0ECheck the error code in the
Preview list.
Some settings could not be
applied normally. See the
error code.
86587010
5iMount the required PCB, and
then retry the operation.
The PCB required for this
operation is not mounted.
86597010
Check the subsystem
configuration.
0iThe operation was ended
normally. Execute the next
operation.
The request operation has
completed.
90027010
0iAn error occurred during the
indicated operation. See the
An error occurred. Check the
error code.
90057010
error code for each operation
in the Preview List.
0iTo cancel, click [OK].Do you want to cancel?91017010
Remote Web Console Error Codes 353