HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 61 Error Codes — Part Code 7005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
Provisioning volume not
associated with a pool.
5iAssociate the XP Thin
Provisioning volume with a
The command has been
rejected, because the
687397005
pool, and then retry the
operation.
specified reserved volume is
an XP Thin Provisioning
volume not associated with a
pool.
0iRetry the operation after the
Quick Format has completed.
The command has been
rejected, because Quick
687437005
Format is performed on the
specified P-VOL.
0iRetry the operation after the
Quick Format has completed.
The command has been
rejected, because Quick
687447005
Format is performed on the
specified S-VOL.
5WThe command cannot be
executed because the XP
The command has been
rejected, because the
687497005
Continuous Accessspecified P-VOL is used as an
Asynchronous pair is not inS-VOL of XP Continuous
Access Asynchronous pair. the PSUS state. See the
Interoperability with Other
Products and Functions
section in the HP
XP24000/XP20000 Business
Copy Software User's Guide
for the relationship between
the state of XP Continuous
Access Asynchronous pair
and the XP Business Copy
operations.
0iQuick Restore cannot be
executed by the current pair
configuration.
The Quick Restore command
was rejected, because the
specified pair is composed
687507005
of the XP Thin Provisioning
volume and the volumes other
than the XP Thin Provisioning
volume.
0iQuick Restore cannot be
executed by the current pair
The Quick Restore command
was rejected, because device
687557005
configuration. Select a pairinformation (Inquiry
where the device informationinformation) for P-VOL and
(Inquiry information) is theS-VOL was different in the
specified pair. same, and execute Quick
Restore.
0iWait for awhile, and then
retry the operation.
Quick Restore cannot be
executed, because the
687607005
configuration is being backed
up in the target volume. Wait
for awhile, and then retry the
operation.
0iDelete the XP Continuous
Access Asynchronous pair,
The Quick Restore command
has been rejected because
688037005
and then retry the operation,P-VOL or S-VOL of Business
or use Reverse Resync
instead.
Copy is combined with XP
Continuous Access
350 Remote Web Console for Storage System Messages and Error Codes