HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 61 Error Codes — Part Code 7005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5ECall HP technical support.The Swap&Freeze option
cannot be specified, because
mode 80 is on.
86577005
0iMatch the number of volumes
composing the LUSE volume
The number of volumes
composing the LUSE volume
86707005
you intend to specify as thespecified as the P-VOL does
P-VOL and the number ofnot match the number of
volumes composing the LUSEvolumes composing the LUSE
volume you intend to specifyvolume specified as the
S-VOL. as the S-VOL, and then retry
the operation.
0iCorrect the MU number, and
then retry the operation.
The specified MU number is
not less than or equal to 2.
86957005
0iWait until L1 pair becomes
PSUS status, and execute the
operation to L2 pair.
Because a L1 pair is not
PSUS, you cannot operate to
L2.
89207005
0iYou cannot create a pair
using these volumes.
The command was rejected,
because you tried to create
552647005
To create a pair by using a
volume without VMA, you
a volume pair formed with a
volume to which VMA is set
by Data Retention Utility and
a volume without VMA.
must only use volumes without
VMA. To create a pair by
using a volume with VMA,
you must only use volumes
with VMA.
6EIncrease the licensed
capacity of Data Retention
You cannot create the pair,
because the licensed capacity
553017005
Utility, and retry theof Data Retention Utility is
insufficient. operation. When an SLPR is
allocated, check the licensed
capacity of the SLPR.
5WUse the Reverse Resync
option.
Quick Restore cannot be
executed because the
556457005
specified pair is composed
of the external volumes with
different cache mode settings.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
563017005
persists, call HP technical
support.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
563027005
persists, call HP technical
support.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
563037005
persists, call HP technical
support.
3ESelect another window. To
set this function, contact the
storage administrator.
This function cannot be used
by the storage partition
administrator.
565247005
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
571017005
344 Remote Web Console for Storage System Messages and Error Codes