HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 61 Error Codes — Part Code 7005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
Guide for the relation
between the state of XP
Continuous Access pair or XP
External Storage Access
Manager pair and the XP
Business Copy operations.
5WThe S-VOL of XP Continuous
Access pair or XP External
The command has been
rejected because the
86157005
Storage Access Managerspecified S-VOL is used as
pair cannot be used as S-VOLS-VOL of XP Continuous
of XP Business Copy. Specify
another volume.
Access pair or XP External
Storage Access Manager
pair.
0iCheck the volume number.The S-VOL is already defined
as a P-VOL.
86187005
0iRelease the XP Auto LUN
setting.
The specified S-VOL is
defined as a source volume
for Auto LUN.
86197005
5WThe P-VOL of XP Continuous
Access pair or XP External
The command has been
rejected because the
86227005
Storage Access Managerspecified volume is used as
pair cannot be used as aP-VOL of XP Continuous
reserved volume. Specify
another volume.
Access pair or XP External
Storage Access Manager
pair.
5WThe S-VOL of XP Continuous
Access pair or XP External
The command has been
rejected because the
86237005
Storage Access Managerspecified volume is used as
pair cannot be used as aS-VOL of XP Continuous
reserved volume. Specify
another volume.
Access pair or XP External
Storage Access Manager
pair.
5WConfirm whether the volumes
specified for P-VOL and
S-VOL are correct.
The command has been
rejected, because there is no
pair available.
86247005
0iCheck the specified volume
number.
The P-VOL(S-VOL) and
S-VOL(T-VOL) have the same
number.
86257005
0iAfter the high-speed Split is
completed, retry the
operation.
The SMPL command was
rejected, because the
high-speed Split was in
progress.
86267005
0iWait until the status of the
pair changes to PSUS.
The Pairresync operation has
been rejected, because pair
status is COPY(SP).
86277005
0iWait until the L2 pair status
changes to PSUS, and then
retry the operation.
The operation of the L1 pair
failed because the L2 pair
was in COPY(SP) status or
PSUS(SP) status.
86287005
0iCheck the contents, and retry.The status mode specification
is invalid.
86297005
0iCheck the contents, and retry.The status mode type is
invalid.
86307005
Remote Web Console Error Codes 341