HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 61 Error Codes — Part Code 7005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0ECall HP technical support.A cache failure was detected.85367005
0ECall HP technical support.The cache capacities do not
match.
85377005
0ECall HP technical support.An SM failure was detected.85387005
0EThere is insufficient shared
memory in DKC. Call HP
technical support.
There is insufficient shared
memory to create 4096
pairs.
85397005
0ECall HP technical support.There is sufficient shared
memory to create 4096
85407005
pairs, but initial subsystem
setup is required before
creating pairs.
0iClose the message box.There is sufficient shared
memory to create 4096
85417005
pairs, and the initial
subsystem setup is complete.
0ECall HP technical support.Failed to complete the initial
shared memory setup.
85427005
0ECall HP technical support.The shared memory size is
different.
85437005
0i16 Mbytes of shared memory
is available.
85447005
0ECall HP technical support.A power supply failure is
detected.
85457005
0iRetry the operation with
power ON.
The command was rejected.
The PS OFF is in progress.
85467005
0ECall HP technical support.A data transfer failure is
detected (CHA).
85477005
0ECall HP technical support.A data transfer failure is
detected (DKA).
85487005
0iYou cannot execute the
operation for the volume
which is not implemented.
The P-VOL is not
implemented.
85497005
5EThe command has been
rejected, because the
85507005
• Restore the blocked
volume, and then retry the
operation.
specified P-VOL is blocked or
used as a system disk.
• The system disk cannot be
specified as a P-VOL.
Specify another volume.
0iWait until the volume is
formatted, and retry the
operation.
The P-VOL is being formatted.85517005
0iCheck the target volume.This volume cannot be
specified as a P-VOL because
85527005
it is used as a command
device.
336 Remote Web Console for Storage System Messages and Error Codes